Resumo:
While looking for alternatives to fossil fuels to cover the current energy demand,
biomass has shown potential due to its availability and the diverse sources from which it can
be obtained. Waste from the cassava processing industry, considered one of the most harvested
crops in the world, which generates considerable amounts of waste, is one of the options that
have been explored. Pyrolysis is a technology that can be used for energy applications while
reducing environmental impact by avoiding inappropriate waste disposal.
In this study, characterization analyses of cassava waste were performed based on
calorific value, ultimate analysis and elemental analysis. Also, thermogavimetric tests were
carried out to evaluate the process kinetics. The material was treated at different heating rates
(50,75 and 100 K/min) under an inert atmosphere from ~25 °C to 900 °C. The results of the
initial characterization showed that the low ash content (1.8%) and the calorific value obtained
(15.2 MJ/kg) make this residue a potential candidate for energy applications compared to other
biomasses. At 100 K/min, the typical temperatures, as the initial and final temperatures of the
reaction, were 315.52 and 373.57 °C, respectively, leading to a maximum temperature increase
of 34 °C for the event, which is attributed to lignocellulosic decomposition.
A similar pattern was observed on kinetic analysis regarding the methods studied and it
was found that the activation energy increases with increasing conversion. Maximum energy
activation value for the Friedman method was 124.5122 KJ/mol, for FWO 190.9809 KJ/mol,
for KAS 118.1212076 KJ/mol and Kissinger 38.519057 KJ/mol.
During thermogavimetric analysis (TGA), the released compounds were analyzed using
FTIR equipment and CO2, methane, hydroxyl, methoxyl and carboxyl group stretching bands
attributed to alcohols, ethers and carboxylic acids, respectively, were detected as a result of
cellulose, hemicellulose and lignin degradation.
It is essential to ensure an appropriate biomass condition for its use in thermochemical
processes to increase the efficiency of the operation. Drying experiments were carried out, and
the effects of operating conditions such as air velocity, air temperature and material thickness
were analyzed. It was found that under temperature conditions of 50, 60 and 70°C with a steady
air velocity of 1.8m/s, drying time was 90 min to reach the 5% moisture required to obtain biooil
with low water content. By evaluating the process under different operating conditions
(thickness, air velocity and temperature), it was concluded that air velocity is the most
influential parameter, followed by temperature. However, a wise combination of these factors increases efficiency, which translates into shorter drying times and, consequently, reduced
costs.
For the simulated cassava waste pyrolysis process, the ideal operating conditions were
a temperature of 475°C and residence times of 1.5 seconds to maximize the bio-oil yield
(50.2%). The bio-oil contains compounds such as levoglucosan (20.6%), organic acids and
furfurans, suitable for chemical and energy applications.
Environmental assessment, through life cycle assessment (LCA), showed that the
energy integration of the process significantly reduces the environmental impact, lowering the
global warming potential from 132,6 to 86,9 kg CO2eq. In addition, a substantial improvement
in energy efficiency was achieved, reducing net demand from 257,4 kWh to 81,6 kWh.