dc.creator |
KANE, Daouda |
|
dc.date.issued |
2002-12-18 |
|
dc.identifier.uri |
https://repositorio.unifei.edu.br/jspui/handle/123456789/3551 |
|
dc.description.abstract |
In Grinding, geometrical irregularities called surface texture and surface integrity are
normally controlled. To obtain a good surface texture and better surface integrity,
depends to a large extend on choosing the cutting parameters. These parameters are
the cutting speed, the table speed and the depth of cut per pass. This work presents the
influence of these parameters on the finishing surface and the subsurface when their
levels are changed. The finishing surface, residual stresses and surface alterations were
analysed. A 23 factorial design was used in the surface finish evaluation. The results of
the analysis prove that in the double disc grinding with CBN of hardened steels ISO
6621-3 subclass MC 66, there is no thermal damage on the surface and the residual
stresses have a tendency to be compressive on the surface and higher when grinding
conditions are not soft. The influence of the cutting speed, table speed and depth of cut
was not significant, but their interactions, were found to play a more significant role in
the finishing surface. |
pt_BR |
dc.language |
por |
pt_BR |
dc.publisher |
Universidade Federal de Itajubá |
pt_BR |
dc.rights |
Acesso Aberto |
pt_BR |
dc.subject |
Retificação dupla face |
pt_BR |
dc.subject |
Tensões residuais |
pt_BR |
dc.subject |
Integridade de superfície |
pt_BR |
dc.subject |
Acabamento superficial |
pt_BR |
dc.title |
Análise da integridade superficial na retificação dupla face de anéis de pistão de aço inoxidável ISO 6621- 3 MC 66 Nitretado |
pt_BR |
dc.type |
Dissertação |
pt_BR |
dc.date.available |
2023-03-22 |
|
dc.date.available |
2023-03-22T19:23:54Z |
|
dc.date.accessioned |
2023-03-22T19:23:54Z |
|
dc.creator.Lattes |
http://lattes.cnpq.br/5317863496971184 |
pt_BR |
dc.contributor.advisor1 |
FERREIRA, João Roberto |
|
dc.contributor.advisor1Lattes |
http://lattes.cnpq.br/2091584947811081 |
pt_BR |
dc.description.resumo |
Na operação de retificação, são controladas normalmente as irregularidades
geométricas da superfície denominada textura superficial e também a integridade
superficial ou seja as alterações metalúrgicas da superfície e da subsuperfície das
peças. A obtenção de uma boa textura e integridade superficial depende em grande
parte dos parâmetros de corte utilizados durante a operação de retificação. Estes
parâmetros são a velocidade de corte, o avanço e a profundidade de corte. Este
trabalho apresenta a influência destes parâmetros no acabamento e na integridade
superficial das peças quando seus níveis forem alterados. Foram analisadas o
acabamento superficial, as alterações da subsuperfície e a distribuição das tensões
residuais. Foi utilizado o planejamento fatorial 23 para analisar a amplitude dos efeitos
de cada parâmetro assim como a da interação entre eles. Os resultados mostram que
na retificação dupla face com rebolo de CBN do aço inoxidável (ISO 6621-3 – subclasse
MC 66), nitretado, não houve danos térmicos na superfície das peças e as tensões
residuais na superfície tenderam a ser de compressão e foram maiores quando as
condições de retificação deixaram de ser suave. Isoladamente a velocidade de corte, o
avanço e a profundidade de corte tiveram pouca influência, mas suas interações
influenciaram significativamente o acabamento superficial das peças. |
pt_BR |
dc.publisher.country |
Brasil |
pt_BR |
dc.publisher.department |
IEM - Instituto de Engenharia Mecânica |
pt_BR |
dc.publisher.program |
Programa de Pós-Graduação: Mestrado - Engenharia Mecânica |
pt_BR |
dc.publisher.initials |
UNIFEI |
pt_BR |
dc.subject.cnpq |
CNPQ::ENGENHARIAS::ENGENHARIA MECÂNICA |
pt_BR |
dc.relation.references |
KANE, Duouda. Análise da integridade superficial na retificação dupla face de anéis de pistão de aço inoxidável ISO 6621- 3 MC 66 Nitretado. 2002. 115 f. Dissertação. (Mestrado em Engenharia Mecânica) – Universidade Federal de Itajubá, Itajubá, 2002. |
pt_BR |